I live in Seattle. It doesn't snow here often. Winters are cold, but temps do not dip below 32 for long periods of time very often.
I live in a small, one-level 950 sq. ft. house built in the 1950s. It does not have air conditioning.
I don't want to get air conditioning, but I do want my house to be more pleasant temperature-wise during the summer, so I'm trying to figure out how to ventilate my attic.
Right now there are two very small, screened vents under the eaves of my house. There are attic vents on the top of the roof, but none under the eaves. I understand this is a problem, and I've read a bit online that you have to have at least the same amount of airflow capacity at the top of the roof as you do under the eaves, and that the total airflow capacity at the top needs to be X amount based on the square footage. So I kind of get that.
I also know that vents have a net airflow capacity rating.
My problem is that I don't want to put in vents that bees and wasps can get into. Seems like every year they're in something new -- last year I had to get a new nest out of the wall, and before that, it was in the wooden steps in my front yard.
Makers of vents must not think that insects exist because when I look for under-eave vents at Home Depot, they're the grate kind with 1/4 inch gaps between metal slats. No bueno. So what under-eaves vents can I use to maximize airflow and minimize insect infiltration?
According to my calculations based off this site, for my 1000 sq ft. attic, I need a total vent area of 6.6 sq. feet, and a soffit vent area of 3.33 sq. ft.
Run of the mill vents like this one provide 92 sq. in. of vent area. This is .63 ft, which means I'd need 5 of them. But if I put netting in there, I'd likely need more. I'm asking if I put netting in there, how many more vents do I have to have?