1

Due to uneven floor, part of the oven does not stay parallel to the counter. I tried to tighten up the foot of the oven but it still does not fix the problem.

This is how the foot looks like:

enter image description here

Is there a way i can create couple of more threads in the foot to make it work?

  • My Precious, it could be done, but it will take a lot of time and care. The potential of screwing it up will still be plenty high. gollum!! – Jack Mar 8 '15 at 21:46
3

Your cheapest and easiest option is a spacer under the foot. A small piece of plywood or a couple of wood shims will do the trick. Both will be available at a home improvement center or lumber supplier.

3

Option #2:

Unscrew the other three feet a little bit.

  • Exactly what I was thinking. – Pᴀᴜʟsᴛᴇʀ2 Mar 9 '15 at 1:09
  • That would raise up the oven above the counter surface. – Asdfg Mar 9 '15 at 1:25
  • 1
    Option #3 would be to remove the foot entirely and replace it with a shim. You could also stick one of the large felt furniture pads under it so it doesn't scrape on the floor. – Jason Hutchinson Mar 9 '15 at 13:45

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.