0

Three year old dishwasher just stops filling with water one day. The diswahser continues through the remainder of the cycle without ever filling with water. If the water supply is available, are there any mechanical issues to investigate? If this is indicative of a faulty control panel, how can I test that?

I'd like to confirm it is the control panel before I replace it.

|improve this question|||||
  • What makes you suspect the control panel? What is the make and model of the unit? – Tester101 Mar 6 '15 at 14:55
  • It's a Kitchen Aid Model #W10311121B. I suspect its control panel because several product reviews and consumer complaints note that after three years they reported replacing the control panel. What else should I suspect? – zundarz Mar 6 '15 at 14:58
  • How can one check the valve? – zundarz Mar 6 '15 at 15:05
2

Some dishwashers have a float switch gadget in the base water tray that floats up with the water level. Should the water level rise too high this activates a switch that cuts off the water supply valve to prevent the dishwasher from flooding the kitchen. I have seen situations where the float unit gets stuck in its upper position and prevents any water filling to occur. In one case the float mechanism got jammed up due to food debris trapped under it.

Check to see if your unit has a thing like this and clean it out and check for free travel of the float mechanism.

|improve this answer|||||

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.