I have replaced filament light bulbs with non-dimmable led bulbs using existing dimmer switch. This combination seams to work well. Will this damage the bulbs or the circuit.

  • The obvious/quick answer is "no"... But is there a specific reason you are asking - are you concerned about something specific in your setup, like the use of the dimmer?
    – Steven
    Feb 23 '15 at 19:11
  • 1
    If it didn't matter they wouldn't make LEDs, or others, that were specifically "Dimmable". Feb 23 '15 at 20:14

Yes, using non-dimmable lamps on a dimmer will eventually damage one or the other. Usually the lamps will suffer, specifically the driver in the LED.

Using the dimmer on full high should be OK, but you have to be careful to keep it that way.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.