I'm about to drill some 5mm diameter x 35mm deep holes to support a new curtain rail and when I used a voltage/metal detector to check for cables etc. it gives an alert for the entire surface of the wall. Is this possible and does it mean there may be a problem with the electrics in the flat?

Possible things I have thought of are:

The detector isn't calibrated correctly. I have calibrated according to the instructions The wall paint is conductive.

What should I do?

  • 2
    What is the wall made of and what type of detector are you using? I would suspect a false positive in that it is extremely unlikely that the entire wall would be energized without other much more noticeable issues. – Comintern Apr 12 '14 at 14:40
  • The wall is drywall, but the full construction I don't know. I have only just moved in and so don't know the paint and any other preparation before I arrived. The drywall knowledge is based on other walls that I have stripped for decorating, one of which is the wall adjoining and behind this wall that I'm getting the strange readings. I'm using a Silverline 3-in-1 detector that does Metal/Voltage on one side and Stud detection on the other side. – Johnny Maelstrom Apr 21 '14 at 17:44

If you're using a metal detector maybe your wall is plaster on wire lath, there's such a thing as electric heat elements embedded in walls or maybe steel studding. You need to know what your wall construction is, and do you mean 3.5mm holes for screws?

  • I did some recalibration, changed the battery and generally spent more time on this and it is not the full wall that is the problem. There is a roughly 1 metre-square section of the wall that triggers the detector. It seems to be consistently metal now rather than voltage and metal alert that it was before. Without a lot of understanding about wire lath, would this be consistent with that? Does that mean I am likely to be safe to drill? – Johnny Maelstrom Apr 21 '14 at 17:47
  • I rushed in the original post previously and meant that I intended to drill to a depth of 35mm. I was concerned with whether the depth would help in diagnosing the problem, i.e. whether or not that depth would be safe or not depending on the underlying problem. – Johnny Maelstrom Apr 21 '14 at 17:50

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.