1

Is there such thing as a soft tip screw driver that won't hurt painted screw tips?

2

In researching your question I came across several jeweller sites that claim that with proper technique you should be able to remove the screws without damage.

However I found this unsatisfactory, so I dug deeper, and the answer is yes, there exists nylon bladed screw drivers

  • Not sure those will work - they seem designed for rimless glasses. I don't know that much about them, but it looks like they only come in incredibly small sizes... – Jaydles Feb 5 '14 at 16:58
  • @Jaydles the OP didn't specify a size; but if they had, I'm sure I could use google to find a nylon screwdriver for it. – virtualxtc Feb 5 '14 at 19:16
2

I put a bit of masking tape over the tip of the screwdriver to provide a bit of cushion and edge protection. I usually run into this when installing wall plates for switches and outlets. A standard screwdriver can scrape the paint off the screw pretty easily, but the tape works for me.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.