I am looking to install a 24-outlet Vertical Power Strip (Tripp Lite PS7224-20), to help have enough plugs for my computer equipment in the basement. Currently I have traced out the wire in the house from the breaker to a covered junction box. The Circuit breaker is 20 amps, and the wiring is 12/2 with a ground to the Junction box. At the Junction Box I have the Pool light on the line.
My question is awhile ago I added a 12/2 with ground out of that junction box for the computer equipment. Is this allowed as long as I used the Romex wire with the plastic junction boxes to house the outlet plug(120V). I want to keep that line and add an additional line that will be connected to a NEMA L5-20R which is needed for the PS277-20(20 amp). I will be moving the load of the devices over to the 20 amp line, and where the current equipment is will be only used to control 1 small device. Currently there is no tripping of the circut so the load is ok on the line. I am really only worried about if its to Code. Any help would be appricated. Sorry for the long winded post, just trying to give a good picture since I can't upload a photo