I'm trying to connect two separate circuits from a single power source using 3way switches. My trouble seems that my wire from my light and my power source are in the same box. Is there a way to do this? I have wired it multiple ways and I keep getting the first switch almost Ike a master that needs to be on for the second circuit to work.

1 Answer 1



You need 14-3 or 12-3 going to each switch from the light/power:

Call the switches L(eft) and R(ight):


  1. LineInPwr(white) -> Lamp(white)
  2. LineInPwr(black) -> L(white tagged black)
  3. LineInPwr(gnd) -> tied in common Both L(gnd) and R(gnd)
  4. L(black) -> R(black) [traveler]
  5. L(red) -> R(red) [traveler]
  6. R(white tagged black) -> Lamp(black)

Connections at L switch:

  1. L(White tagged black) -> L SW (common)
  2. L(Black) -> L SW (brass) [traveler]
  3. L(Red) -> L SW (brass) [traveler]
  4. L(gnd) -> L SW (gnd)

Connections at R switch:

  1. R(White tagged black) -> R SW (common)
  2. R(Black) -> R SW (brass) [traveler]
  3. R(Red) -> R SW (brass) [traveler]
  4. R(gnd) -> R SW (gnd)

Our own BMitch provided an answer and diagrams here (originally found here). We differ slightly in wire assignments (mine's better ;-)(why? both switches have the same wire assignments, the magic happens at the light)), but its basically the same. enter image description here


Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.