0

enter image description hereJust bought flush MOON ceiling light. The ceiling receptacle has red(live),yellow (live) and white pair (zero) wires.

How to connect black and white wires to this?

Thanks VS

New contributor
Sunder V. is a new contributor to this site. Take care in asking for clarification, commenting, and answering. Check out our Code of Conduct.
6
  • 2
    We need a few pictures of the fixture and how the old one was wired. what part of the planet are you on?
    – JACK
    May 15 at 16:47
  • 2
    What country are you located in? Black and white wires imply North America but the wire colors for your fixture don’t. Also, your terminology doesn’t make sense. You should have a hot, a neutral and a ground, not two “lives” and a “zero”.
    – DoxyLover
    May 15 at 16:50
  • 3
    Red & yellow wires are perfectly legal for hot wires in the US if they are individual wires run in conduit. Pics are needed so we can see what you're seeing.
    – FreeMan
    May 15 at 16:59
  • 1
    And if in conduit, the whites are supposed to be neutrals. Two hots do make life interesting. One should be a continuation to something else(and dead if not connected) or a switch hot.
    – crip659
    May 15 at 17:34
  • one of the wires looks like a painted black wire
    – jsotola
    May 15 at 23:13

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.