There are many things I like about drywall. It's easy to cut, moderately easy to hang (practice certainly helps), easy to paint, is relatively cheap, and a fire barrier to boot. I've probably missed a few positive attributes too.

Drywall mud and tape though... well, that sucks, or at least I suck at it, even with practice. It takes a long time, creates a heck of a mess, and is easy to do a bad job and hard to do a good one.

Mudding and taping sucks enough that I don't mind paying for someone else to do it for me. I may even pay a premium. Except, contractors who I know are good at it are already booked to next year and beyond. There are other contractors available, but they are aren't very good (says painful experience), or at least not good enough for the money they want. There are, I assume, some out there who are both good and available, but invisible to me.

Sooo, what if we just skip the painful part, and just use drywall without mud and tape? What are some creative solutions? that still look good?

  • 2
    You CAN do it. There's a whole bunch of youtube video's of people showing you how to do it properly. It's actually not as hard as you think. Change your mindset
    – hookenz
    Jul 21, 2013 at 20:29
  • Put a batten of trapezoidal section over each joint that works off the bevel in the drywall. Once painted over, it becomes a "design feature". Certainly not for everyone, but may not look too bad.
    – bcworkz
    Jul 21, 2013 at 22:30

4 Answers 4


Hang everything horizontal. Throw some 1x6s (using wider board will really cover any hanging mistakes - sure 1x4s would work too) on the main seams to make a faux rail. A lot of decorators are breaking up rooms like this now. The rail usually being white and different colors on top and bottom. Your would also need something for the vertical seams. You can go with 1x6s or 4s again. This would look fine for the bottom section and could look fine for top but not common. I guess it would have a alsace/swiss feel.

On corners, including ceiling joins you can use quarter round. If you painted this well it wouldn't really be that noticeable. White for ceiling joins and the same color as surrounding paint for the other corners or seams.

This could be done. It could look great. You could even convince me if you were really good with wood work that this could be done in a similar amount of time as mudding. But you will spend more time on materials and will have a style that not everyone is thrilled with.

On the issue with taping and mudding... If you apply your coats thin enough then it isn't messy at all. I do 5 total coats. I scrape with my knife between each coat. After the 4th coat I might sand a little if I was messy - but not much. It isn't messy or hard. It is very time consuming I agree.

  • A swiss look might work for this room. Thanks for pointing out whatever is used instead of mud+tape will have it's own, possibly greater, time cost. As to many coats and not much sanding... well, hasn't worked out for us yet. :) We're on our 4rth reno project involving drywall now. Jul 22, 2013 at 15:51
  • I consider myself a bad "artist" and mudding is easier with an artistic hand. There are really just two rules to go by. #1 You need to progressively use wider knives and #2 don't ever leave a ridge next to unmudded drywall. #3 (if you have trouble with the first two) scrape off your areas 4-5 hours later and never add extra coats without scraping. We have been looking at houses lately and have noticed a couple of "swiss" basements... really wondering if they mudded now.
    – DMoore
    Jul 22, 2013 at 15:58

Most drywall is rounded to accept mud joins so I'd still mud the joins, even just glob it on and scrap it in once to fill the abscess. After that a textured wall or wall paper would cover it up.

One of the most creative solution I've seen is putting it up as horizontal sheets, put a chair rail up to cover the horizontal seam. The bottom was white or tan but on the top every sheet of drywall was a different color. It was a non-profit that helped feed kids so they actually had chairs lining the wall (kinda hid to lower half's seams) and bright colors above.


I've seen walls fire-taped, or just mudded, with maybe a little sponging but not sanding, then wallpapered and they looked fine. The wallpaper covers up a lot of the roughness that would otherwise have to be sanded out. But this wall covering should then be considered permanent; taking it off will make a mess. The wood trim can be put on right over it. And, future owners should be warned not to try to remove it. Using an un-pasted wall covering and that thick wallpaper cement they sell in tubs might be the best choice here. Then, when the surface gets worn or grimy, the wallpaper itself can be painted, rather than removed. Any obvious seams can be covered with fiberglass mesh and very lightly mudded and sanded at that point.

  • A lot can show through wall paper, though, it depends on the paper. When we bought our house, the living room was papered, but it was very obvious they'd hung the paper right over that high quality wood paneling that was so popular in the 70s. You could see every groove in the paneling right through the paper. We papered over the top of that, but we did go with a heavier paper and it's heavily patterned. If you get up close, you can still see the grooves from the paneling, but you've got to look hard. From arm's length, they're pretty much invisible.
    – FreeMan
    Nov 16, 2021 at 16:28

From what I remember, If you don’t tape the seams, you are not providing the fire resistance envelope that the system is designed to provide. Even 1/2 inch drywall provides some fire resistance and can make a difference in you being able to hear the alarm and get to safety.

Not the answer you're looking for? Browse other questions tagged or ask your own question.