1

Noobie here.

I am having issues 1) figuring out how to remove this shower trim - didn't see any screws to remove and there are no logos anywhere on the outside.

and 2) figuring out the brand!

Wondering if anyone has seen this before. The way it works is that pulling the lever down starts the water, and turning it side to side changes the temperature. It has a ball-in-socket type of mechanism.

Thank you!

enter image description here

4
  • 1
    #2 almost impossible unless someone who sees it has the same/similar one. The trim on the wall might be just attached to the caulk/sealant or might be on clips if no screw holding it.
    – crip659
    Jul 10, 2022 at 16:29
  • the triangle icon on the handle may be a clue ... the greek capital letter delta is a triangle ... duckduckgo.com/?q=greek+delta&iax=images&ia=images
    – jsotola
    Jul 10, 2022 at 17:47
  • @jsotola it could be just an arrow point up
    – Traveler
    Jul 10, 2022 at 18:13
  • Unscrew the shower diverter knob, cut the seal around the wall cover and remove the cover
    – Traveler
    Jul 10, 2022 at 18:15

0

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Browse other questions tagged or ask your own question.