0

Why does my leads to my stove heating element keeps burning out at the terminals where they connect. I've replaced it several time, but it only last a week before the wires at the terminal burn the wires.

5
  • 2
    Make/model of stove? Picture showing the damage? Nov 29 '21 at 15:06
  • Hello and welcome to Home Improvement DIY. Could you include a picture so we better see where this is and what you mean with "burn out"? Also, please take the tour
    – P2000
    Nov 29 '21 at 15:06
  • Common causes would be too small of wire gauge or high resistance in circuit(dirty/loose connections), or using non heat rated wire(common wire instead of stove rated), if inside of stove.
    – crip659
    Nov 29 '21 at 15:07
  • 1
    It is an old HOTPOINT stove. It is the connection where the element goes into the back of the stove. Took the 2 screws loose and the terminal is still attached, but the wire isn't connected. Using the same wire, I've crimped a new terminal, but it doesn't last and you can smell burning. Nov 29 '21 at 16:04
  • 2
    A crimp is not a good connection for high current applications unless you have really good tools & technique. Nov 29 '21 at 16:22
2

From your comment "Using the same wire, I've crimped a new terminal" it appears that the crimping or the terminal itself is not up to snuff for the job. Electric stove elements have high current and heat, which requires special engineering to handle.

You should probably get official replacement wires from the manufacturer or a certified parts source.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.