0

My house's basement has wood shelves that are firmly attached to the basement's concrete walls. I need to remove these shelves (because of molding issues) but my drill is not strong enough to detach the screws. Can anyone recommend a suitable type of drill for this job. Thank you so much.

enter image description here

enter image description here

enter image description here

3
  • 1
    How about some pictures? Have you considered a rotary tool with a cutoff wheel, like a Dremel?
    – JACK
    Jul 17 at 13:56
  • Some masonry screws have heads compatible with hex sockets as well as more common screwdrivers. Post a close-up picture of the screw. Jul 17 at 14:03
  • Thank you. I added photos of them. Some are Phillips and are flushed against the wood. Others have a flat head and are hexagonal. Those stick out. They have been in place many years. I tried the manual method described by crip659 but they didn’t budge at all
    – Mauricio
    Jul 17 at 20:52
3

Would use a hand screwdriver with a square shank that fits the head of the screw. Can place a wrench on the shank to give more power to turn screws out. If screws are lag bolts, a wrench should do it. After screws are loosen, then drill can finish the job.

1
  • Thank you for the tip. I tried but the screws didn’t budge at all. I think those shelves were out in place many, many years ago.
    – Mauricio
    Jul 17 at 20:51
2

For the first one, an appropriate sized 6-point socket, and a ratchet (wrench)

For the second one, the correct size of Phillips bit (likely a #3) and a socket to fit that bit, and a ratchet.

i.e. not a drill at all.

Depending on age and corrosion, the screws may break rather than turning. In that case, remove the remains with a cutting disk in a grinder, doing so at a time when you will be present and awake for hours afterwards, lest a spark from cutting should lurk somewhere and start a fire.

The color and application suggest that these are Tap-Con® screws directly into concrete.

1
  • Thanks so much for the detailed answer! I’ll try what you described
    – Mauricio
    Jul 17 at 21:18

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.