0

I am installing a swing check valve on the plumbing of a pond. The purpose is to prevent the water from flowing backwards through the pipes during a power outage. It water were to flow backwards, which I've tested does indeed happen if the pump is unplugged, it would dump dirty water from the filter back into the pond and also potentially overflow the edge of the pond.

I'm wondering if it matters whether the swing check valve is installed horizontally or in a vertical position, if that will have some impact on its function, as perhaps gravity could have some impact on the swinging of the valve.

1

If it is spring loaded then orientation does not matter but if it is swinging pure then it has to be orientated that its weight causes it to close.

1
  • If not spring loaded , I mount in vertical position what ever the instructions say. I was using old valves with relatively heavy bronze flappers. Otherwise you are depending on the water pressure to close it. – blacksmith37 Apr 3 at 14:38

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.