I'm installing a pre-hung exterior door on the back of the garage. The door jam is 4 9/16" wide. The total width of the wall (interior face to exterior face) is about 5 3/4"
The door jam is about 1 - 1 1/8" too narrow.
My question is where should I place the face of the door jam? Should I place it flush with the inside face of the drywall or place it flush with the exterior of what will be the face of the finished stucco?
Currently, it's just studs and sheathing. I'm looking for a best practice since I have options right now.
Moving from the Interior to Exterior Drywall 5/8" Wall framing 3 1/2" OSB Sheathing 1/2" Stucco about 1 1/8"