I'm trying to figure out how to hook my hot water supply up to my new bosch 500 dishwasher. I have this hose, which does fit the dishwasher:
And attached are images of the hot water shutoff valve under the sink that was hooked up to an old dishwasher and removed by someone else. I have no idea what fitting to get to make these fit, the supply hose I have is too small, can I can't tell what size this outlet is or what combination of parts I need.
I am thinking it might need a compression nut + pipe that then goes into the angle it came with, with another compression nut... but I could be wrong. Please help! It's a somewhat old valve, the house was built in 1989, I would prefer not to have to replace it if I can help it. Or maybe I need a different supply hose?
Edit: I think this is actually the valve that this one is, the other 2 above it are smaller and appear to be the 3/8" variety, but I think the one below it is just an older version of this: