2

I bought a 2 Ceiling Lights (Halo BLD606930WHR) with 2 Dimmers (Lutron DVCL-153PR-WH). They are compatible lights and dimmers.

When turning the dimmer Totally down to 0%, one of the lights continues to remain on at very dim level, the other light shuts off completely like its supposed to.

Do you know what the issue can be, and how can it be fixed? Maybe something installation? Additionally, does having a light like this, cause any damage to the circuit, or a hazard?

The dimmers and switches seems to be work normal aside from that, when using it above 0%. Using the light switches will turn off both lights, which is good.

Update

The Halo lights are 8W Watts.

One thing I noticed in our house, this issue does Not Occur with other ceiling light brands of higher 18W or 15W installed on same dimmer type. Wondering if higher wattage gets rid of the dimmer 'ghosting' issue.

enter image description here

enter image description here

Resources:

https://www.amazon.com/Halo-BLD606930WHR-Integrated-Recessed-Compliant/dp/B07FRP2VYY

https://www.homedepot.com/p/Lutron-Single-Pole-or-3-Way-Diva-LED-Dimmer-Switch-for-Dimmable-LED-Halogen-and-Incandescent-Bulbs-White-DVCL-153PR-WH/203670402

2

Read the instructions for the switch. It states it is designed for incandescent lamps. This technology runs a small amount of power through the load to function it is not visible with incandescent lamps but is with LED’s because they take a small fraction of the power to illuminate. So that small amount of current is the cause of the lamp not shutting completely off.

7
  • hi, actually it was a mistype on amazon, if reading closer, its actually for LED, as I saw on instructions homedepot.com/p/… – earlwaltonluv3462 Dec 20 '20 at 19:28
  • "Provides best dimming performance for LED bulbs etc" – earlwaltonluv3462 Dec 20 '20 at 19:28
  • "The Diva LED+ dimmer provides optimal dimming performance of LED bulbs. This dimmer works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. " – earlwaltonluv3462 Dec 20 '20 at 19:30
  • anyways, is this kind of behavior in LEDs and dimmers normal, nothing to worry about? – earlwaltonluv3462 Dec 20 '20 at 19:30
  • I just went to the linked document. If there are 2 blacks and a green a good ground is required as the switch returns the current on the ground to function so that may also be the problem but if I remember correctly without a ground they will not work. As far as if this is normal, yes it is a common occurrence when the switch draws power through the load it may be 2-3 watts and that is enough to make your LED’s glow. – Ed Beal Dec 20 '20 at 19:45

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.