Looking for a good way to tightly connect two round rods in a T configuration.
I figured something like a T-clamp would be the obvious solution and easy to buy, but I have searched rather extensively and the closest thing I've found online is This, and from the measurements quoted it appears way too big.
In my application the vertical part is a 3/8" diameter steel rod, and the horizontal crossbar is a 7/8" diameter wood handle (to twist the rod). The rod is already inserted into a hole in the handle, but after many years the handle is now slipping, hence the need for a fix.
Can anyone suggest a reasonably simple means to secure the handle so it won't slip? I know I've seen T-clamps in pictures somewhere, but if they aren't as commonly available as I thought, I may need something different.
The local Home Depot has told me on the phone that they don't have anything like this.