0

Honda advertises their iAVR generators as producing stable enough power to run a computer. For example, see "applications" section at https://powerequipment.honda.com/generators/models/em6500. However, THD, frequency tolerances, etc., aren't listed.

Can anybody here provide measurement-based reasons why or why not it's safe to power sensitive electronics with a honda iAVR generator?

  • 1
    Used generators to run computer fine, but put a simple load on the genny first so it was running stable then connected the computers... – Solar Mike Sep 30 at 20:07
  • It's always a good idea to put power filtering between any source and sensitive electronics - including computers, TVs, stereo gear,... . Even if the iAVR output is clean, "things" can happen on your house wiring or the grid feed into your house. – Carl Witthoft Oct 1 at 18:31
  • desktop or laptop? – dandavis Oct 1 at 21:38
  • @dandavis both, plus modem and network equipment – zwiebelspaetzle Oct 1 at 21:44
  • @CarlWitthoft, regarding power filtering, would you use a basic power conditioner, like a Furman SS6B, or something more advanced with a "clean power" generator? – zwiebelspaetzle Oct 1 at 21:48
1

The 'promise' of the iAVR generators is that they CAN power sensitive electronics like computers. This is why they cost so much more. If you are concerned, I would put a spike filter and UPS in-between the source and the computer load; it wouldn't have to be a big one. However, the computer has some natural filtering because it uses a an AC to DC power supply which already has filtering on both ends.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.