I installed an irrigation system for my lawn with 1/2" PEX tubing. Most of it is buried, but at the start of the run I want to run it through some PVC to make it look cleaner where it is coming up from the ground, where my water timer is.
My issue is I want it to look really clean, so I want the top of the PVC run coming up from the ground to have a female garden hose thread on it, where I can then attach my water timer. I am trying to figure out how I can connect my PEX line that is running through the PVC to a fitting that attaches to the top of the PVC with a female garden hose end. Any ideas?