2

I had to replace an improperly used plastic ceiling box with a metal box to correctly ground existing old armored cable. I thought I took a picture of the box before but I don't have it so I'm having trouble reconnecting the light. Off of this box are:

  • Single pole switch for overhead bedroom light
  • Two 3 way switches for bedroom closet and hallway light (both go on and off at same time)

With how it is currently wired, the single pole switch/light are working and the closet light is working with the 3 way switches. I am not sure how to reconnect the hallway light so that it also goes on/off with the closet light and 3 way.

Thanks in advance.

This is where the hallway fixture goes: ceiling box

On the left is the bedroom overhead light. On the right is the 3 way for the hallway light and closet light (these are supposed to come on at the same time): 2-gang switch box

The other 3 way for the hallway and closet light: 1-gang switch box

  • You've done well to include a picture! (Amazing how many people don't.) It would be even more helpful if you could label the wiring we can see. – FreeMan Jun 22 at 17:39
  • Can you post photos of the insides of the switch boxes involved please? – ThreePhaseEel Jun 23 at 0:25
  • I added photos of the switch boxes, thanks. – Vincent Jun 24 at 22:07
  • Which fixture did the box in the first photo serve, if any, and which switch in the second and third photos is which? – ThreePhaseEel Jun 25 at 1:12
  • The ceiling box in photo 1 is where the hallway light was connected. The switch on the left in photo 2 is for the bedroom overhead light, switch on the right is the 3 way for the hallway light and closet light (these are supposed to come on at the same time). Switch in photo 3 is the other 3 way for the hallway and closet light. – Vincent Jun 26 at 12:14
0

Copied from my comment as an answer: I took off the working closet light and it is a black/white wire going to the fixture. I traced this wire back to the ceiling box and the black wire goes to #4, white goes to #1. Red wire in #1 is always hot, black wires in #4 are hot when the light is on. Wired my fixture the same as the wire to the closet light - black to #4 and white to #1 bundle and it works now. Thanks!

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.