I just Installed a new swamp cooler motor, 2 spd, on previous owners 1 spd wiring.
When i flip the switch there is a loud buzzing noise and the shaft doesn't spin. I Adjusted belt and no change.
Any help would be much appreciated.
-
"I just installed a new swamp loud buzzing noise" why did you install a swamp loud buzzing noise ? Words ! I love the sounds of the swamp at night. – Alaska Man Apr 17 '20 at 21:08
-
Lol forgot motor – CrazyAdder Apr 17 '20 at 21:14
-
More info is needed about motors and how you wired the "new" one. – Alaska Man Apr 17 '20 at 21:28
-
Dial 115v 1/2hp, green to ground red to low and white to common black is not connected because the previous owner did not run a wire to black – CrazyAdder Apr 17 '20 at 22:29
-
How's the motor capacitor hooked up? – ThreePhaseEel Apr 17 '20 at 23:55
|
Show 3 more comments
