0

Hardware I would like to mount

  • Router: AVM FRITZ!Box 7590
  • Switch: Netgear GS116E-200PES 16-Port
  • 2 * Raspberry Pis (3 & 4)
  • various CAT.7 cables
  • Powerstrip
  • ??? (ideas are welcome, should be related to router)

The switch may be a bit oversized. It comes from my old apartment where I had a LAN port in every corner in every room. I still would like to continue use it in case I'm moving to a new apartment where it can be put to good use.

I want to mount it on a wood board and place the board on a wall. That wood board can be put and removed from the wall (so no permanent install) in case I'm moving to a new apartment I can just take the wood board with me instead of rewiring everything again.

My questions:

  • How thick should the wood be?
  • What kind of screws should I buy? (How big and how deep?)
  • For the wall mounting:
    • How do I create the "hooks" so I can mount it on the wall and remove it from the wall? Like when you are hanging up pictures. Which "hooks" should I get?
  • Cable management:
    • What do I buy for cable management?
  • What do I need to pay attention to?
    • Risk of fire due to hardware's close proximity to wood?
    • Bad idea, because ... ? Do this instead?
    • ...

I've seen a nice DIY article about such project before but I lost the article. Answers with links to those articles are also welcome.
I'm a novice at home improvement and would like to start with something small like this.

2

1/2" plywood would be fine. If the hardware has keyhole mounting holes, I'd get 1/2" pan head screws for that. Get whatever size would fit the keyhole. Disclaimer: YMMV, IMHO there's no fire risk, despite all the hardware, there's very little power actually being drawn, so I wouldn't worry about that.

Command (brand) hooks are usually the go-to for attaching things to walls without damaging the surface, but you are probably above the limit for what they can hold. A small picture hook would probably do, although would leave a small hole.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.