I recently installed recessed LED lights in by basement. On two of the three runs I have an issue that when I first turn on the lights some of the lights only produce a low dim, and don't react the the dimmer switch's level. However, if I turn the lights back off and then on again everything works perfectly. This happens every time I use the lights.
Also when I first turn the lights off the lights give a quick burst of light before they turn off. However, this only happens when there is a light didn't isn't working properly, it doesn't do it after I turn them back on and all the lights work correctly.
I have switched out the dimmer switch to one that is compatible when the LED lights, but that didn't fix the problem.
The lights are Commercial Electric Easy-up canless LED recessed lights Model #CER407943k50wh. The dimmer switch is Lutron Diva C.L. Model # dvcl-153p. I have switched out the dimmer switch and that hasn't worked. I've put in an non-dimmer switch and this fixed the problem, but I would like to have these lights be able to be dimmed.