0

I'm trying to replace old ceiling light with a new one. New light has only blue and red, no green. There are 2 cables coming from the ceiling each with 3 wires. Green/blue/red and green/black/red. I've blocked green/green and tried blue/black to blue and red/red to red but light goes on but not off. Blue to blue and black/red/red doesn't work. Any suggestions? UK.

  • Can you post a photo of the ceiling rose please? – ThreePhaseEel Oct 19 at 16:50
  • Light is in place just now. I can post tomorrow, but Its just two separate cables with wires as above. Wiring at least 30+ years old. – AlanJ Oct 19 at 17:40
1

Green is indeed ground pretty much everywhere except old work in the Soviet Bloc.

You need to attach the new light the same way the old light was attached. It is likely of the 4 wires from the wall, two of them were attached to each other and not to the lamp. Reconnect those same ones the same way.

In wiring, colors don't mean a whole lot, becuase cables are made to standardized colors. (Old: black-red... new: brown-blue). So the information of how wires are connected is valuable. It is the only documentation for how the circuit is wired.

However, in that era in the UK, they were fond of using a special-color cable for "switch loops". In this case, the color coding sort of works out.

  • Red is supply/always-hot, and comes from supply and goes to switch. It does not go to the lamp, the lamp has no use for always-hot.
  • Black is old neutral, and should go lamp neutral (which is blue/EU or white/US.)
  • what remains is switched-hot. It is Blue (old) from the ceiling. And from the lamp, brown/EU or black/US.
  • Thank you. I'll try tomorrow – AlanJ Oct 19 at 18:33
  • Worked first time! Many thanks. – AlanJ Oct 20 at 14:49

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.