0

I recently finished several doors in our house, using two coats of stain - one each of a different stain - and polyurethane to finish. For one door, I forgot to put on the 2nd coat of stain by accident before finishing.

Is it possible to remove the poly, without removing the stain so I can "simply" add the missed 2nd coat and then re-finish?

This is a pocket door that doesn't appear to have a straightforward way to remove it without busting it out of the wall. Bonus points if the method can be done while the door remains in place.

I have no reservations about chemicals, realize some affect may befall the stain, and understand this isn't going to be a pleasant experience no matter the method.

0

Mix equal parts of lacquer thinner and denatured alcohol and stir well. Apply the mix with a paint brush and in small sections because you can't leave it on long and it has to be removed fast. After about 10 to 15 seconds remove immediately with #0000 steel wool. Wash off with a wood cleaner, rinse and pat dry.

| improve this answer | |
  • I read that article too. Do you have experience with this method? – Evil Closet Monkey Aug 27 '19 at 0:12
  • I just finished using it on a dresser to remove the polyurethane only. I wanted to redo it with shellac. I did it in five sections. The alcohol cuts the strength of the thinner and after I had finished it I thought that if I had used more alcohol in the mixture I wouldn't have had to work so fast and could have reduced the number of sections. It worked great. – JACK Aug 27 '19 at 0:28
  • @JACK, your answer says to mix "lacquer and denatured alcohol"; did you mean to say "lacquer thinner"? – Jimmy Fix-it Aug 27 '19 at 1:35
  • @ Jimmy Fix-it Wow, thanks! That would definitely affect the results he wanted. – JACK Aug 27 '19 at 11:45

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.