I build a fence a few months ago in the winter and over time I have observed the post that holds my fence gate (5.5ft) started to twist. At the same time, the door when I installed it, it was straight, whereas now it has been settling. In fact, I have already cut some of the bottom pickets but it still is acting up.
Now I am not sure if I should cut the pickets anymore fearing that it may settle even more. I used for my gate this kit (https://www.lowes.com/pd/homax-easygate-15-7-10-in-steel-painted-gate-hardware-kit/1000194567?cm_mmc=shp--c--prd--hdw--google--lia--145--gatehardware--1000194567-_-0&kpid&store_code=1631&gclid=Cj0KCQjwhJrqBRDZARIsALhp1WRg72rTfg_y4xwj0HBrKFdjMqxdUz9VZHcobUtaoX6n1tTTJI_CWCgaAlItEALw_wcB&gclsrc=aw.ds) so in theory I should not be seeing any sagging and honestly the frame looks square.
Has anyone had similar experience with this and how I can remedy the situation without needing to pull the post out and place a new one (since the issue may happen again if I am missing something). I don't mind the sagging too much as long as it is structurally okay but I mind if I see the door sagging even more.