I just had my house pressure washed and my power to my bathroom does not work. The breaker for my bathroom/outside receptacle did not trip. I replaced the outside outlet and the electric still didn't work.
I believe the gfci in the main bathroom tripped, but I couldn't reset it because whoever painted my house painted over the electrical covers. So, I replaced 2 switches and 2 outlets in the main bathroom. Turned the power back on and by golly it reset. There was a dim light from the led light bulb and the lights were lit on the switches I bought. However, when I went to flip the switch to turn on the light it didn't turn on.
I tried to look online and I remembered something about the tab on the outlets and when I replaced the outlets in other rooms I broke the bridge on the hot side. So, I did that in my bathroom outlets and when I turned the power back on I had no dim light or the lights on my switches.
I'm so close, what did I do wrong?