-1

I wanted to use the bottle trap for the minimal quality but that's out the window because my sewage pipe sticks too far out of the wall. The first issue was that mt bottle traps tailpiece didnt fit the sewage so I used a boot. Now the issue is that the sewage pipe is too far down which makes the entire bottle trap much too low from the pop up drain in the sink. In addition to it being too low, I don't see a way to connect the trap to the drain since the trap "screws" onto something and the drain pieces doesnt have any threads. I tried to lost photos but the system said they were too large.

  • Any Suggestions on howto add photos would be appreciated! – LaTasha Duncan Jul 19 at 5:23
  • 1
    You really need to edit this, I have read it twice and still I don't follow... – Solar Mike Jul 19 at 7:59
  • Hello, and welcome to Home Improvement. There's a 2MB limit on uploaded photos; you need to shrink yours so they'll be allowed. And I agree with @SolarMike; it's impossible to understand this (what's a "bottle"?). – Daniel Griscom Jul 19 at 10:52
  • 2
    Here is a description on how to add photos: meta.stackexchange.com/a/75498 – PhilippNagel Jul 19 at 13:13
  • Thank you! I will try this on my desktop. – LaTasha Duncan Jul 20 at 8:18

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.