idiot DIY'er here :P. I recently installed a smart thermostat and long story short; I removed the two wires from my furnace's board for the external air conditioning unit in the process. I was going to put them back today, but found that the Y and C wires that are coming from it are not standard colors, so I am absolutely unsure which is which. I tried to look up some information on which is which before just connecting them and I found a few stack exchange postings on which to connect where, but no concrete "this goes there" info.
I have a few pictures of the connector from the outside unit with the corresponding wires which i am trying to identify and I think that the combination that I am looking at is as follows (connector->low voltage wire):
Y wire = Yellow/Orange->White C wire = Black->Red
Can someone just confirm that I am correct with this based on the pictures posted?