2

I need to run a liquid propane gas line from my tank to my house. The house and tank connections are currently copper tubing. I was thinking of using yellow poly pipe for this run, but I haven't been able to find the proper transition pieces from the yellow pipe to copper. What kind of transition fittings could I use?

Additionally, this could be a dumb idea, so feel free to tell me that also.

Here is the yellow poly pipe: https://www.amazon.com/gp/aw/d/B0759LPYSZ/ref=ox_sc_act_image_2?smid=A28LU3M6V82A2C&psc=1

4

You can certainly use polyethylene pipe. There are some considerations that need to be made

  1. It must be to code.

  2. The branch of pipe you are referring to is called the yard line. It's in between the first stage and second stage regulator. It's often considered the property of the utility unless you own the tank.

  3. For code compliance all polyethylene pipe must be buried as its not uv resistant. My code states a minimum of 18" and a minimum of 24" under driveways and walkways. A trace wire must also be attached.

This is what a complete set looks like

enter image description here

www.rphdistributorsltd.com

The picture shows more than what you would require. I picked this one to give you an idea of what is available. Specifically this riser is what you are looking for. Common brands are

  • Gastight

  • Perfection Pipe

  • Home-Flex

  • Can poly be used for propane? I remember there being a reason that iron was used for natural gas and copper for propane. – Sherwood Botsford Mar 28 at 1:23
  • Poly, iron and copper are suitable for both NG and propane. Copper flows less due to it being measured outside diameter vs. iron measured inside diameter. Propane's higher pressure and roughly three times heat content allows for a much smaller diameter line compared to NG. So copper becomes practical. I can gas up a propane house in fractions of the time because all I need is a flaring tool, a couple handfuls of fittings and a roll or two of 1/2 and 5/8 copper. That's not going to happen on NG. Threader, wrenchs, crates of fittings and much larger pipe. – Joe Fala Mar 28 at 1:41

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.