2

I am buying a home and as part of the contract we asked for a number of fixes by a certified contractor. For this fix, securing the loose flashing, the home owner said his friend was a contractor so he has no receipt for this specific fix.

The fix entailed 4 exposed nails to secure the flashing. Is this proper/up-to-code/won't-leak?

enter image description here

0

1 Answer 1

4

They probably should be dabbed with roofing cement, but they tend to self-seal to some extent. It's unlikely that they'd leak significantly.

Also concerning is the fact that raw steel nails were used. They'll rust and stain the roof over time. Cement will mostly remedy that as well.

FYI, I don't consider those nails necessary anywhere short of a hurricane zone. Hidden nails and the sealing strips on the shingles hold it all down just fine.

4
  • 1
    Shiners are normally covered I like a product called black jack but I agree with isherwood + I normally would not nail the bottom edge.
    – Ed Beal
    Mar 18, 2019 at 18:35
  • Thanks guys. Put Black Jack/roof cement on top of the nail? Or remove the nail and put some in the hole and renail?
    – rys
    Mar 18, 2019 at 18:35
  • You can just cap it with sealant. It may work loose over extended time, but it will either way.
    – isherwood
    Mar 18, 2019 at 18:36
  • 1
    I lift the shingle and nail under it then stick shingle back down with black jack
    – Kris
    Mar 19, 2019 at 14:18

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.