I have some power-line ethernet adaptors that worked great in my previous house. At my new house, they can't get more than a few KB per second because there's too much noise in the line according to the device statistics. How can I troubleshoot what's causing the noise, and what tools would I need?

2 Answers 2


You could start by turning off circuits at the service panel one at a time until the noise level drops. Once you have it isolated to a particular circuit, turn off or unplug devices until you find what's causing it. The usual suspects for electrical noise in houses would be motors -- fridges, washers, etc. -- and fluorescent lights generally the 4' or 8' long tubes with magnetic ballasts, less so with CFLs (see Brian's comment below), so you should start with those circuits first.

If you can't isolate the problem that way, and if you can power your networking equipment from batteries (laptops, UPS, etc.) you could turn off the main breaker to the house and see if the problem is inherent to the wiring or environment.

  • 3
    While CFLs are not as bad as the old long tube fluorescents, they (especially the cheaper brands) do generate a good deal of EM hash compared to other common electrical appliances. Replacing fluorescents/CFLs with alternate lighting has been known to cure a wide variety of interference issues. Sep 2, 2010 at 19:09

You also want to consider that if you plug two of these powerline networking devices into circuits on different poles (every other breaker in your breaker box), then the devices literally have to communicate with each other through the inner coil in the big step-down transformer on the power pole outside, which probably doesn't help.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.