0

I'm not exactly sure where to post this question. I've checked a bunch of places on Area 51, and many of the clothing specific StackExchangess have been closed.

I figured that the people most associated with contracting would be most likely be able to help me with this problem, and I suppose that caring for clothing damaged by home improvement activities would (technically?) fall under the home improvement domain as it is part of the clean-up process of home improvement.

Anyway, I got some black roof caulking on my jeans and was wondering if anyone had any tricks for getting it off. It's not a bit deal, but I would prefer to not have it on my jeans if I can get it off. I tried manual abrasion and got a decent amount of it off already, but the remainder is rather resistant to abrasion.Roof Caulking

This is a picture of the pants after abrasion: Jeans

I haven't washed them yet, but I was wondering if anyone had a go-to way to remove it. I'll update the question after I wash them to see if that helped any.

  • I don't have experience with that specific sub-product, but from knowing about the other varieties of PL (polyurethane adhesive)... you might be doomed. To get it off your skin, you basically have to shed a layer of skin. If you were feeling brave, you can try acetone (found in some nail polish removers). The internet also suggests "methylene chloride", but I suspect the MSDS sheet on this one is a mile thick. – Aloysius Defenestrate Jan 2 at 2:36
  • 1
    You wear old jeans - not your new best ones... – Solar Mike Jun 3 at 11:08
  • @SolarMike I did, that doesn't mean that I want a spot on them though :) – Sarah Szabo Jun 9 at 7:47
  • @SarahSzabo that stuff is designed to stick like sh1t to a blanket - otherwise the joints leak... So sticking to jeans is easy... – Solar Mike Jun 9 at 7:51
  • 2
    Congratulations you now own a pair of work pants. You do want the spot on there because when you go to grab your work pants you want to make sure you’re putting on your work pants. One of the benefits of wearing work pants as you have someplace to wipe your hands. – Alaska Man Oct 1 at 18:29
0

I grew up doing stuff like this I had canvas pants for hot tar that could stand up in the corner after a day, chemicals not so good today were used back then to melt the tar and other solvent based adheasives, I mentioned this because it'some of the laytex sealers are tricky and not find 530 love locktight for other things but have have not used in this case. I might look at a latex paint remover to help.

  • I was doing roof work once and a guy I was working with told us the quickest way to get tar off our hands was with gasoline. I was dubious at first but by the end of the work day I was like the scene in Zoolander. – Alexander Nied Jan 2 at 6:08
  • @AlexanderNied Wow, I wouldn't have thought of that, but you might be onto something. I remember something similar in one of my chemistry classes. If it's not much better after washing, I'll try it out. – Sarah Szabo Jan 2 at 8:32
0

Get some odorless paint thinner from local art supplies store. Place a piece of wood on the bench with some old towels/rags to make a working surface. Place the stained area over the towels and wet it with the thinners. Use an old scrub brush to help soften the caulking and scrape with a plastic putty knife. Add as much thinner as needed to remove the caulking.
Then use the brush along the fabric grain to get all the last bits out. Blot all the thinner, then pour on a liquid laundry detergent. Scrub lightly then rinse with warm water, then repeat the detergent step. Rinse one more time, then into the washer.

  • Sounds like experience to me, I'll give it a try! – Sarah Szabo Jan 2 at 8:33

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.