1

I currently have a ceiling fan with a light in my bedroom, that is controlled primarily by a single switch, but the light and the fan are also controlled separately by pull chains on the fan. What I want to do, if possible, is add some recessed lights to the room, that are connected to the fan switches (ie. the wall switch has to be on, but the pull chain for the fan light has to be on for the recessed lights to be on). So I want to be able to run the fan with the lights all turned off, as well as the lights with the fan off. Can I hook canned lights up to be controlled by the fan pull chains?

3

It is theoretically possible, but there are several problems:

  1. The pull chain switch for the lights has a certain amperage rating and adding the cans might exceed that rating
  2. The fan assembly with switch is likely a UL approved device, and modifying it would likely void that approval, which may run afoul of local code
  3. You would need to run the hot wire for the cans into the fan unit to join it to the hot coming out of the pull chain switch. Or you would need to run a pigtail from that switch to the canopy to meet the wire for the cans. Either case requires disassembly of the fan unit and switch unit.
  4. You may have a space problem fitting another wire and wire connector in the area of the pull chain switch.

Probably could be done, but why not rely on a separate switch on the wall? Or a smart switch with a remote?

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.