3

The 1st image below is a typical diagram for a switch with 2 lights. I have a scenario where I can't wire the 2 lights in series because they go off in different directions. Can I wire it like the 2nd (modified) image below?

enter image description here

enter image description here

  • We wire lights in parallel not in series. You can tap the conductors at the existing light or the switch location. – Ed Beal Sep 26 '18 at 21:41
  • Neither of these is series. Be aware that in many cases power does not come as illustrated, conveniently into the switch box first from a different direction than the lights. – Ecnerwal Sep 27 '18 at 0:00
  • This is a step up from the usual MS Paint drawings. It looks like you cut apart the first image and reassembled it in Photoshop or another image editor. – user76859 Sep 27 '18 at 0:50
  • The first image shows the lights electrically in parallel even though the cable is going in series to each light. – immibis Sep 27 '18 at 3:13
5

I the simplest of terms. Yes you can.

  • Thanks. Previously, there were 2 sets of wires running from the box to one of the lights. I am assuming one going to the light, and one going back to the same box, where I assume it connected to the other light. Is there a preferred method? I would assume running just one wire is easier. – Mike Sep 26 '18 at 20:08
  • No, that was probably power coming from the light fixture location to the switch, and switched power going back to the light(s). – Ecnerwal Sep 26 '18 at 23:58
  • One line winning answer. Also a win for OP since they did their homework. – Harper Sep 27 '18 at 2:25
  • There are 2 romex cables running from the switch to one light fixture and they are not live. That is what confused me. It sounds like I can wire it like I show in the 2nd image and just remove one of the wires. Thanks! – Mike Sep 27 '18 at 14:13

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.