I have three electrical panels in the house and with each one, one of the face screws is under the cover as seen in the picture. So it's clearly intentional. What's the purpose of it?

enter image description here

enter image description here

  • 1
    What model are these panels? – ThreePhaseEel Aug 10 '18 at 11:41
  • It is not quite clear what you mean by "under the face". Can you clarify? To be honest the thing you point to in the picture looks pretty much like a panel screw even when zoomed in. Maybe a close in picture with good lighting and focus would help. – Michael Karas Aug 10 '18 at 12:12
  • 2
    Is it always the screw behind the latch area? – isherwood Aug 10 '18 at 13:26
  • Yes, the screw is under the panel. So instead of making the face tight to the box, it does the opposite: it creates a gap. – Wynne Aug 10 '18 at 14:50

I can see that the screw was over the cover at one time by the marks in the paint. This leads me to wonder whether bulging the cover by keeping that screw behind may have let the latch operate easier.

  • Maybe they did that to make the latch work at all. If somehow the panel box was warped upon mounting. – Michael Karas Aug 10 '18 at 21:25
  • This "feature" is present on all three of my electrical panels. – Wynne Aug 11 '18 at 1:30
  • Is it always the screw next to the latch? if so, this seems like a pretty good and likely answer. – PhilippNagel Apr 19 at 1:16

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.