I mounted a tv (60") on my living room wall too high. The heavy-duty mounting bracket uses large screws that required that I drill a 7/32" hole into the studs and used a socket wrench to tighten them in. (Total of 4 screws, two in each stud placed vertically maybe about 8" apart from one another)
I'd like to remount the bracket about 4" or 5" lower than what it is right now on the SAME STUDS. Is this a problem? I am worried that if I do this again (re-drilling/bolting into the studs) it isn't going to be as durable since I've already done this higher on the same studs.
I don't know that this matters, but this is a two story house and this is on the first floor. Thanks,