I've found a screw like this. It doesn't have a whole thread, it's threaded both near the tip and near the head but not in the middle.

enter image description here

What's the purpose of this?

Furthermore the thread is partially serrated, why?

  • Hello, and welcome to Home Improvement. My guess is that is an extremely specialized screw (especially with the small head and thread-cutting start), and doesn't have anything to do with Home Improvement. – Daniel Griscom May 5 '18 at 20:49
  • 1
    That looks like a decking screw. – Dan D. May 6 '18 at 0:22
  • @DanielGriscom what stackexchange section is good to ask about this? – skan May 6 '18 at 0:59
  • 1
    This seems like the best place to ask – poorplanning May 6 '18 at 3:40
  • I've used screws like that for addressing squeaks in hardware floors.... – Bryce May 6 '18 at 5:22

Doing a quick image search on Google, it looks like Dan D.’s is correct. “That looks like a decking screw.” It is also referred to as a “terrace screw.”

| improve this answer | |
  • This looks even closer, but it certainly looks like a deck screw. spaxpacific.com/products/spaxd.html – Mark May 6 '18 at 18:51
  • OK, but there are no details about the reason of that shape? – skan May 6 '18 at 23:48
  • The split thread is so that you can partially reverse the screw (if necessary) to even out flooring levels, i.e. if you have a low spot, then you back out the screw and the board should rise to match. I think there is usually something a little different about the top bit of thread, but maybe not on all examples/ – Mike Brockington Feb 25 at 10:15
  • @MikeBrockington - correct.. but the opposite also works.. once the thread is anchored into the frame base. the split thread enables a separation between the frame base and the board. -- often the "Fixing Thread" -- the section on the top. is slightly more compressed so that the thread ratios differ between the setting thread and the fixing thread -- Essentially presses the board harder onto the frame (preventing creaks) – Hightower Jul 2 at 6:18

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.