I live in the Philippines and we don't have neutral wires. I got a Wink Relay 2 years ago but it is a 110v system, something I couldn't use here. But recently I found a way to convert it to 230v.
When I tried to replace a 2 gang switch with my Wink Relay. I saw that there are only 3 wires. Unfortunately the Wink Relay requires a neutral wire to power itself.
What are my options in this? Can I use the line/live as the neutral?
I don’t think there are more wires at the back because the wires are coming from above, see photo:
The wire with a masking tape is the live. The other 2 are the loads.
And this was how the wiring of the original switch was done. 4 wires in total, but the 4th one is really short and just connecting the switches.