isherwood: Same oven as prior question, but new issue.
In bake mode, the broil and bake elements get warm. Neither element gets hot. In broil mode, neither element gets warm. The cycle lamp is on in each mode. The controller terminals show proper continuity across all terminals in all modes.
The oven is a Hotpoint RK38T. The controller is model WB22X5134. All electrical and mechanical, no electronic components
I would appreciate comments on the cause and how to fix this issue.
New data: The voltage across the thermostat terminals shows 224 volts in broil mode. I was expecting 110 volts because line 1 is not connected to the thermostat in broil mode.