0

I have several 2"x4" x 12ft pieces of wood that I will use as rails. I need to secure them to several 1/4" steel plates. The steel plates have two holes for screws ( or whatever I end up using). The wood doesn't have holes and I don't want the screw to go completely through the wood.

What's the best way to secure the 2x4 to these plates?

Thanks.

Improve this question
2
  • It's not at all clear what you're asking. What specifically is the problem you face? With no idea what you're building, what can we say? – isherwood Jan 16 '18 at 2:15
  • Yes we need more details and possibly some design drawings. – Paul Logan Jan 16 '18 at 5:14
1

The wood doesn't have holes

So I'd use something like a bradawl to mark the positions then drill a pilot hole if necessary (depends on wood, position of hole, diameter of screw etc)

See How can I drill to an exact depth with a hand drill?

and I don't want the screw to go completely through the wood.

That's just a matter of buying the right sized screw.

Improve this answer

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.