I've got this LED batten light to replace old Tube lights.
It's pretty light in weight and is full electrical fixture in itself, not needing electrical fixtures like before.
It simply mounts on 2 tiny metal clips that can be screwed into a surface.
- Links & pics updated
Now I'd like to be able to direct the positioning of it from Vertical up to Horizontal to vertical down.
Ideally being able to hold at any angle between +/- 90.
I've shared it's main unit is mounted on. I'd like to figure a fixture or way by which the clips can be screwed on to it instead of directly to wall or wood surface.
A simple up & down would be via a simple butt Hinge but I'm hoping to find something better to angle it as I see fit.
Updated info & thoughts:
Now instead of the Metal part of Clip that goes directly to a wall or mounting surface I'm hoping for some kind of simple metallic hinge like attachment that could become the "rotatable / adjustable/ swing up- down" mount in the middle.
Any particular existing simple hardware fixtures that could do this for me?
- Apparently there are some "Torsion / Friction Positioning Hinges" that could help this scenario. I'm wondering if thats the only way or they are also called something else or similar components?