I have a panel in this two story house that has a weird wiring setup. The outlets around the house have been divided into 4 breakers of 15AMP each, which normally work however there is a single one of the four that takes a majority of them (living room, dining room, master bedroom, and a second bedroom). This is causing that breaker to be tripped at least 1-2 a week. The panel does have 5 or so spots left on it where no breakers are installed. I'm wondering if it's possible to take that one breaker that's constantly tripping and divide it into a newly installed 15AMP breaker?
If anyone has the answer or maybe a different solution for how to fix this that would be great as I'm worried about wearing out the existing breaker.