0

How long does oil based Kilz need to dry before I apply a skim coat texture to my ceilings?

I've recently scraped a popcorn texture down to drywall. Now I want to seal the porous surface before applying a skim coat.

My assumption is a full 24 hours is plenty of time to wait.

  • It depends largely on factors you haven't mentioned--ventilation, ambient humidity level, temperature. 24 hours is probably enough, but it may not be without proper handling. – isherwood Jul 26 '17 at 13:26
2

The best suggestion is to read the manufacturers instructions on usage. This information is often printed on the paint container label. You can also check at the manufacturers web site and look up the particular type of paint you are using.

For example: http://www.kilz.com/products/primer/kilz-complete Click on the "PREPARATION, APPLICATION & CLEAN-UP" tab near bottom.

| improve this answer | |
0

From the link in the accepted answer, I found the following:

http://www.kilz.com/products/primer/kilz-original

Dry Time at 77°F (25°C), 50% RH Dries to the touch in 30 minutes at 77°F (25°C) and 50% humidity. Recoat or topcoat after 1 hour.

| improve this answer | |

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.