1

I am trying to replace my capactitor in my ceiling fan, because the blades do not spin but I do hear a humming sound. When I opened it up. I have 2 capacitors

The first capacitor is smaller and has 3 wires and is rated 4uf 250V Red White White

The second capacitor has 3 wires and is rated 5uf 470 1/2W and 6uf 470 1/2W Gray Purple Brown

My question is I CANNOT find ANY matching capacitors online! Does anyone know what other kind of capacitor I can use?

enter image description here

enter image description here

EDIT: To clarify lets say I buy these two capacitors, how exactly would I wire this? I couldn't find matching capacitors online

enter image description here

enter image description here

  • I assume these are for the speed control -see my answer.. – Ken Apr 19 '17 at 20:02
1

Yes they are speed control capacitors.

For clarification as another poster pointed out - one is for speed settings (4.5uf with resistors - aka RC network) the other 5uf is a run or start capacitor. The link below is a package with 3 capacitors built in - note it does not have the RC network for the speed control but has your 5uf - 250Volt you can use for the start/run capacitor, it might work to replace both of your units - there are others that have these 3 capacitors with 5 wires as well making it easier to install.

Capacitor 4.5uf/5uf/6uf

other Ceiling Fan Capacitors

enter image description here

  • Well, one of them is :-) – Carl Witthoft Apr 19 '17 at 20:03
  • @CarlWitthoft The 5uf is probably a start capacitor - 5uf sounds like that - you should find it in the same place. The link had a triple capacitor - probably usable in the ops situation.either way he needs to use the right terminology to search it - Ceiling Fan Start Run Speed Capacitor or a combo of those terms.. – Ken Apr 19 '17 at 20:06
  • Ok so if i would get this particular capacitor- I would match up the wire colors with purple to purple gray to gray brown to brown and red to red. But that leaves me with 2 white wires and a gray wire left over? I'm a little confused with the wiring? Do I also need to find a RC network capacitor? – kozmo Apr 20 '17 at 16:28
  • @kozmo I added a diagram - although you have 6 wires - you really only have 5 connections. Two of your old wires actually connect in the same place. See the added diagram for more clarity - I hope that helps you. This should work - but the resistors are a timing / filtering - in other words they filter electrical noise. I have used this setup in mine with no problems - you might even find these capacitors at a Home Depot (about 3 months ago I picked mine up there). – Ken Apr 21 '17 at 17:52
  • @Ken: Thank you so much!!!! I appreciate all your help – kozmo Apr 21 '17 at 17:57
0

First of all, the "470K" represents the resistors. The caps are 4 and (6 parallel to 5) microFarad respectively.

The second package contains a filter consisting of 2 caps and 2 resistors.

In any case, start by tracking down "SK" company, or check out the link in the other answer.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.