My Furnace Fan/Inducer Motor (not the Blower Motor) has been noisy all the time lately. I put some 3-in-1 motor oil by the Gasket. That really seemed to eliminate the noise. Some people have said (outside this forum) to oil it or not oil at all. I chose to oil-the sound was so loud. Was it ok to oil and with that type of oil?
I put it by the gasket. But what are the 2 orange rubber plugs that I can remove off the housing unit? Should oil go in there too?
Don't laugh. I'm a single homeowner and don't know much about furnaces. And I can't afford a HVAC guy right now.
Thanks for the replies. (My main question was about whether the 3-in-1 was ok to use to oil the gasket)