0

We have a Swanstone composite granite drop in sink. We have a very narrow counter. The sink fits but the sink boss extensions in the front will not be used and I would really like to cut them off to gain the extra half inch plus in the back so we can position the sink out from under a window sill and I can install a tall faucet. Just don't know if I can just saw them off or if there are considerations for safety and durability that I need to consider. Also what would be the best tool to use for this? Thank you for your input.

  • Can you post a picture or reference to the sink? Chances are, you could just hack them off with an angle grinder, but this carries considerable risk. – Aloysius Defenestrate Jan 3 '17 at 15:37
  • "the boss extensions in the front" - what, exactly, do you mean, here - the rim/flange of the sink? That's definitely structural. I can't find anything referred to as a "boss extension" in the installation manual swanstone.com/images/link_installation/… – Ecnerwal Jan 3 '17 at 22:32
2

If you mean the tabs for the brackets to attach?, cut them off with a 4" diamond cutting blade; have eye protection and shop vac hose tied off near cut to cut down dust; hold up on very slight angle to avoid cutting into rim edge of sink top. Silicone that edge down with some weight on top until silicone sets up.

|improve this answer|||||
  • Hello, and welcome to Home Improvement. Thanks for the answer; keep 'em coming. And, you should probably take our tour so you'll know how best to contribute here. – Daniel Griscom Feb 18 at 2:22

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.