I have some equipment that was purchased in the UK that came with the power cord missing the plug (has 3 wires exposed; Brown Live, Blue Neutral & Green/Yellow Ground). The equipment says it is 50/60Hz so that shouldn't be a problem. My question is how do I wire a US plug to this with only 3 wires when the US needs two Live wires and a ground? Do we just hook 110v to Brown Live and 110v to Blue Neutral and Ground to Ground or does that end up putting live back to ground on the equipment? This line in the manual has us concerned:
"Ensure that the mains supply is single phase alternating current (ac) of the stated frequency (Hz), with neutral nominally at earth potential"
Not sure if that quoted text is just for in the UK or ??