0

First of all, I am REALLY not the manual type of guy. I am renting this place, with this flooring in the entrance and the kitchen, that is in very bad shape. It's old, very used, which males it very dirty very quickly. The owner already told me I could do what I want, that it doesn't matter since when I leave he will redo the condo to sell it...

I have 300 square feet to cover.

I was considering peel and stick tiles at first, but I hear from a lot of people that it will unpeel, and that it is not good, etc.

The cheapest tiles at Home Depot are $0.59 per square foot. They told me to apply some glue under however. Total would be under $200.

Then the owner told me to find vinyl planks. I found some, the brand is Beaulieu, it is $1.69 per square foot on sale, can be laid over the existing linoleum, no glue. Total: around $500

Then I thought about Vinyl sheets. I found some at Lowe's or Home Depot that are decently priced. I could cover everything for like $300. Without cost of glue (if needed, I don't even know). The issue here is that the existing vinyl has some a texture though it's not very deep, but I am scared it would show up through the new one.

Would it, even if I get a vinyl sheet that is 3 millimeters thick?

Any advice or other option?

Improve this question
5
  • 1
    How long do you want to be there? A year? 10 years?
    – Aloysius Defenestrate
    Commented May 13, 2016 at 20:40
  • 1
    If you're "really not the manual type of guy" you should probably have Home depot come and lay some mid-grade vinyl over the top and be done. I'd bet it would be right around that $300 mark with labor. You'll have a nicer finished product than you'll get yourself.
    – isherwood
    Commented May 13, 2016 at 20:47
  • At least a year and a half
    – user2031269
    Commented May 13, 2016 at 21:43
  • Given your timeframe: peel and stick. It won't curl, and if it did, nobody would care. Telegraphing of the old pattern? Pfft!
    – Aloysius Defenestrate
    Commented May 14, 2016 at 4:42
  • LOL at this typo: "which males it very dirty very quickly".
    – fixer1234
    Commented May 29, 2017 at 18:36

1 Answer 1

Reset to default
1

Self-adhesive tiles bond well if the surface is prepared well. If you can strip it chemically and apply a bonding primer you shouldn't have problems.

To install vinyl sheet over vinyl you should usually level the existing embossing using, get this, an embossing leveler. You simply trowel it onto/into the texture of the old floor to make it flat. This technique does depend on both the old and new flooring products being appropriate for that use.

What I'd do depends on how long I expect to be there. Chances are I'd find some nice rugs that I could take with me when I go.

Improve this answer
1
  • I have thought about the rugs, however I don't like having a rug in the kitchen.
    – user2031269
    Commented May 13, 2016 at 20:36

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.